Walk the house.
Punchlist AI does the rest.
Record a walkthrough on your phone. Punchlist AI watches the video, identifies every issue, tags severity and location, and creates a punch list inside the home — automatically. No clipboard. No retyping. No items forgotten on the drive back.
How it works
Three steps. About a minute total.
Walk the house
Open the home in Cornerstone PM™. Tap Record. Walk the rooms and talk through what you see — "replace this baseboard, repaint the trim above the window, the bottom shelf in the office needs to come out." Or upload a video you already recorded.
Punchlist AI watches
The AI ingests the video and audio. It identifies every issue, transcribes your callouts, infers severity (critical / high / normal), pins the location (Kitchen, Office, Master Bath), and links it to the right scope (Trim, Paint, Drywall, etc.).
Vendors auto-assigned, one email each
Every item lands in the home's Punch List with a thumbnail, severity tag, location pin, and scope. Punchlist AI auto-assigns the right vendor based on the scope, then groups every task for the same vendor into a single email. One vendor, one message, one clean checklist — instead of ten separate pings.
What Punchlist AI catches
Trained on real home-building walkthroughs. It understands the trades, the rooms, and the language your supers and vendors actually use on a jobsite.
The list below is a sample — not a hard limit. If you call it out on the video, Punchlist AI captures it.
- Trim and millwork callouts
- Paint touch-ups and repaints
- Drywall, mud, and texture issues
- Cabinetry, doors, and hardware
- Flooring scratches, gaps, and transitions
- Tile, grout, and caulk
- Plumbing fixture install and finish
- Electrical outlet and trim plate issues
- Appliance install and alignment
- Cleanup and trash items
- Anything you call out by voice during the walk
Auto-assigns the right vendor to every item.
Every punch item gets a vendor automatically. Cabinet issue → your cabinet vendor. Paint touch-up → your painter. Plumbing fixture → the plumber. Punchlist AI already knows who owns each scope on this home — so the moment the item is created, it's routed to the right hands.
- Scope-to-vendor mapping is per home — the cabinet vendor in Bayside isn't the same as the one in Eagles Landing, and Punchlist AI knows the difference.
- One walkthrough, twelve issues for the painter? Punchlist AI groups every painter task into a single email — photos, severity, location, all in one place.
- Override anytime. The auto-assigned vendor is a smart default, not a lock — swap in any vendor with one tap.
- Hit Send to Vendors when the list is ready — every vendor gets their grouped task list in one shot.
No manual triage. No "who does this one go to?" No spreadsheets. The list is already routed before you put the phone down.
Why it actually works
Most "AI punch list" tools are glorified voice-to-text. Punchlist AI watches the video and understands construction.
Video → Punch List in under 60 seconds
Most 10-minute walkthroughs are processed in under a minute. No clipboard. No retyping. No 'I'll add it when I get back to the office.'
Auto-tagged location, scope, and severity
Punchlist AI doesn't just transcribe — it understands. It tags every item with the right room, the right trade scope, and the right severity so it lands in the right hands.
Voice + visual together
What you say AND what the camera sees both feed the AI. Point the lens, say the problem out loud — both signals are merged into one clean punch list entry.
Works on partial walkthroughs
Final walk? Pre-drywall walk? Vendor closeout walk? Punchlist AI handles all of them. Run it as many times as you want on a home — it adds to the existing list, doesn't overwrite.
Built into the app, not a bolt-on
This isn't a separate tool you have to learn. The punch list lives where your home lives — alongside your schedule, budget, and design selections. One source of truth.
Resolved tracking + photos
When a vendor fixes an item, mark it resolved and attach a photo of the fix. Your final walk closeout package is documentation-ready out of the box.
Auto-assigns vendors by scope
Every punch item gets the right vendor automatically. Trim issues route to your trim carpenter. Paint touch-ups go to the painter. Plumbing fixtures hit the plumber. No manual triage — Punchlist AI already knows who owns each scope on this home.
One vendor, one email
Walk a house and find twelve issues for the painter? Punchlist AI groups every painter task into a single email — clean checklist, photos attached, severity and location for each. Your vendors get one message instead of twelve. Builders save the admin time. Vendors actually read it.
Every walk on the build
Pre-drywall, final, vendor closeout, warranty — same workflow, every time.
Walk the framing, point out blocking issues, missing pipe penetrations, electrical placement problems — Punchlist AI captures every callout for the trades.
Walk with the homeowner. They point out concerns. You record. Punchlist AI builds the closeout list automatically — no more 'we'll add that later' getting forgotten.
Walk each finished scope with the vendor. Capture remaining work in one pass. Lock the punch list before final payment.
Record the homeowner's warranty items during the visit. The list is already built by the time you're back in the truck.
Punchlist AI is a Foreman skill — and Foreman has 100+ more.
The same AI that builds your punch list also reads your blueprints, generates MLS listings, compares vendor bids, scrapes Home Depot pricing, and runs profitability reports — all from natural-language commands inside the app.
See all 396+ Foreman AI skillsStop paying
for software that's
built for someone else.
Cornerstone PM™ was built by a builder who got tired of wrestling with enterprise software. Request beta access today — no credit card, no catch.